The world's ultimate garage creeper super internet build 5000
video description
Date: 2020-07-07
Related videos
Comments and reviews: 10
autos
They should do a more realistic luxury creeper Mark II.
Like less ghetto and more likeable lol. This was fun though!
-Put one of those store bought massage mats that you put on chairs and use that as the padding. Keep it plugged in the whole time to get a massage while working
-Add one or two adjustable arms, one with a light and a fan. I'd recommend an area light and a beam light so you pretty much get the whole shebang without having to adjust it a lot.
-Just attach a thin power strip to it and attach a high end legit portable battery that has 3-prong outlets on it.
-How about instead of drinking with a straw, just get rid of the straw. You can take a break and waterfall from the can. You already don't have to get up just to take a drink anyways. I would recommend some sort of lid for your drinks though, a lot of dirt and grime will definitely get into even a small opening. Even aluminum cans have reusable lids you can buy that add an easy open/close feature.
-If we could go through the supports at the wheel mounting points so that they can add bigger wheels or just allow a lower ride it would be possible but I never use these things to tell you if it's important.
-A horizontal bar parallel to the creeper where you can have a roll of shop towels, or a spot for a small box of cloths.
-If possible, a pull-out tray underneath the creeper in an easy to reach spot. This is where your most common wrenches, bits, and sockets can go in case you forgot one so you won't have to roll out, get up, and grab it, and hopefully not mistakenly grabbed the wrong one when you get back under your project. Just put magnetic parts trays down there with all these metal pieces stuck to it so you can just grab the whole magnetic tray to look at each one with ease and not worry about them rolling around in a drawer or something
-I don't know how no one thought of a magnetic parts tray being attached to this. Heck, add another adjustable arm to keep it closer to view, or just unstick it and attach it to the bottom of whatever car you are working on, just don't forget to remove it when you leave.
reply
They should do a more realistic luxury creeper Mark II.
Like less ghetto and more likeable lol. This was fun though!
-Put one of those store bought massage mats that you put on chairs and use that as the padding. Keep it plugged in the whole time to get a massage while working
-Add one or two adjustable arms, one with a light and a fan. I'd recommend an area light and a beam light so you pretty much get the whole shebang without having to adjust it a lot.
-Just attach a thin power strip to it and attach a high end legit portable battery that has 3-prong outlets on it.
-How about instead of drinking with a straw, just get rid of the straw. You can take a break and waterfall from the can. You already don't have to get up just to take a drink anyways. I would recommend some sort of lid for your drinks though, a lot of dirt and grime will definitely get into even a small opening. Even aluminum cans have reusable lids you can buy that add an easy open/close feature.
-If we could go through the supports at the wheel mounting points so that they can add bigger wheels or just allow a lower ride it would be possible but I never use these things to tell you if it's important.
-A horizontal bar parallel to the creeper where you can have a roll of shop towels, or a spot for a small box of cloths.
-If possible, a pull-out tray underneath the creeper in an easy to reach spot. This is where your most common wrenches, bits, and sockets can go in case you forgot one so you won't have to roll out, get up, and grab it, and hopefully not mistakenly grabbed the wrong one when you get back under your project. Just put magnetic parts trays down there with all these metal pieces stuck to it so you can just grab the whole magnetic tray to look at each one with ease and not worry about them rolling around in a drawer or something
-I don't know how no one thought of a magnetic parts tray being attached to this. Heck, add another adjustable arm to keep it closer to view, or just unstick it and attach it to the bottom of whatever car you are working on, just don't forget to remove it when you leave.
reply
arjovenzia
For anyone who is into ganking ryobi bits for other stuff. Yes, im an addict, got hooked, but dem batteries. Cheapest option, wee torch, n fits an alibaba 5a stepdown inside it. Some screw terminals on the side. Bam, uni 12v supply! And, its got a torch! I use my ryobi batts to run my potable ham radio rig. Not the very best setup ever, but impossible to beat in handy-dandyness. Haxxin your ryobi kit, 8/10 stars, would reccomend.
reply
For anyone who is into ganking ryobi bits for other stuff. Yes, im an addict, got hooked, but dem batteries. Cheapest option, wee torch, n fits an alibaba 5a stepdown inside it. Some screw terminals on the side. Bam, uni 12v supply! And, its got a torch! I use my ryobi batts to run my potable ham radio rig. Not the very best setup ever, but impossible to beat in handy-dandyness. Haxxin your ryobi kit, 8/10 stars, would reccomend.
reply
Jamison
Excellent idea for a project. Here's a few recommendations: three tiny fans installed under the creeper, no plumbing, no flashing lights, thinner foam in shoulder area. The magnet bar is cool, but a tray on the other side would be great. The speakers and battery adapter should be flush mounted. Excellent concept, just needs to be more user friendly.
reply
Excellent idea for a project. Here's a few recommendations: three tiny fans installed under the creeper, no plumbing, no flashing lights, thinner foam in shoulder area. The magnet bar is cool, but a tray on the other side would be great. The speakers and battery adapter should be flush mounted. Excellent concept, just needs to be more user friendly.
reply
Martin
love it but thats not the transfer of a liquid or gas from a dilute to a concentrate via a semi permeable membrane. whats worrying ia 21 years after i finished school why do i remember this. Top siphoning though lads. perhaps u could use the inards of a ladys personal massager to improve your massage feature. Keep it up. no pun intended
reply
love it but thats not the transfer of a liquid or gas from a dilute to a concentrate via a semi permeable membrane. whats worrying ia 21 years after i finished school why do i remember this. Top siphoning though lads. perhaps u could use the inards of a ladys personal massager to improve your massage feature. Keep it up. no pun intended
reply
Mongrel85
That was thoroughly entertaining! This is why I love MCM because like me, you do a heap of stuff for your own personal amusement and who cares if everyone likes it or not? The videos aren't compulsory to watch you trolls! Keep up the madness, it makes me giggle in my feels.
reply
That was thoroughly entertaining! This is why I love MCM because like me, you do a heap of stuff for your own personal amusement and who cares if everyone likes it or not? The videos aren't compulsory to watch you trolls! Keep up the madness, it makes me giggle in my feels.
reply
Nathaniel
Some really good ideas. I'm going to make a steel and merbau creeper myself, with a bend for shoulder.
I love the magnet, lights, speakers and phone holder. I'm going to pass on the enema tube and cup holder though.
I might even look into the massager.
reply
Some really good ideas. I'm going to make a steel and merbau creeper myself, with a bend for shoulder.
I love the magnet, lights, speakers and phone holder. I'm going to pass on the enema tube and cup holder though.
I might even look into the massager.
reply
Bang
Hai MCM, i wonder if you can make a video about Daihatsu Move/Daihatsu Peanut. Cause i had a Daihatsu but commonly remake by malaysian to be a KENARI. So i wonder if you guys could make one video for this daihatsu MOVE and what mod can be put in it. THANKS>
Fans
reply
Hai MCM, i wonder if you can make a video about Daihatsu Move/Daihatsu Peanut. Cause i had a Daihatsu but commonly remake by malaysian to be a KENARI. So i wonder if you guys could make one video for this daihatsu MOVE and what mod can be put in it. THANKS>
Fans
reply
Todd
Cool idea. I see lights in my next mode. Facing up and down. AND, if you are going to 3D print something, maybe some thought to the idea of making the hose fittings right angles so that the hoses are already headed in the direction of use. Home run boys!
reply
Cool idea. I see lights in my next mode. Facing up and down. AND, if you are going to 3D print something, maybe some thought to the idea of making the hose fittings right angles so that the hoses are already headed in the direction of use. Home run boys!
reply
Andrew
you talk about getting a sponsor from rhobi and get a gift from then, then a minute later tell your audience who they would be trying to sell to, if they sponsored you that their vacuum or tool sucks so bad you don't use it, classic as the castle mate
reply
you talk about getting a sponsor from rhobi and get a gift from then, then a minute later tell your audience who they would be trying to sell to, if they sponsored you that their vacuum or tool sucks so bad you don't use it, classic as the castle mate
reply
Elwood
You guys are great. You gave building information on welding, grinding, measuring, casters and then went off the deep end of silly. I like that some episodes are just for fun and that not everything is about a massive build off. Keep up the great work.
reply
You guys are great. You gave building information on welding, grinding, measuring, casters and then went off the deep end of silly. I like that some episodes are just for fun and that not everything is about a massive build off. Keep up the great work.
reply
Add a review, comment
Other channel videos
