How to Unlock a Write Protected USB Drive, a SD or Micro SD Memory Card or a Hard Drive in 2021 - Hetman Software
video description
I've tried doing as it asks, but still get the same thing happening each time.
Any ideas?
Date: 2022-03-28
Related videos
Comments and reviews: 8
Jay
I got the -DiskPart has encountered an error message-. This is what worked for me: Flip the switch on the SD adapter/card to the LOCK position, then go back to the UNLOCK position, and try again. For some reason, it was stuck on -LOCK- when it was already unlocked. And this was brand new from the supplier.
reply
I got the -DiskPart has encountered an error message-. This is what worked for me: Flip the switch on the SD adapter/card to the LOCK position, then go back to the UNLOCK position, and try again. For some reason, it was stuck on -LOCK- when it was already unlocked. And this was brand new from the supplier.
reply
James
If the card adapter has a notch but no slider switch it will only register as -write protected-. A command prompt sequence will not cure that physical error because the computer mechanically reads an empty notch as -read only-. However, you can put a piece of tape over the notch to cure the problem.
reply
If the card adapter has a notch but no slider switch it will only register as -write protected-. A command prompt sequence will not cure that physical error because the computer mechanically reads an empty notch as -read only-. However, you can put a piece of tape over the notch to cure the problem.
reply
Sir
my sd card has 2 partitions when you check the windows explorer.
and when i run the -create partition primary- command, i get this error:
DISKPART> create partition primary-
Virtual Disk Service error:-
There is not enough usable space for this operation.
please help.
reply
my sd card has 2 partitions when you check the windows explorer.
and when i run the -create partition primary- command, i get this error:
DISKPART> create partition primary-
Virtual Disk Service error:-
There is not enough usable space for this operation.
please help.
reply
Richard
I had to attach a Virtual disk file as part of the original partition.
Also located the disk location through the properties section in my computer.
Came up as Location 0.
I-m able to pull files directly off the laptop folder onto the SDHC Card now.
Lovely Jumbly
reply
I had to attach a Virtual disk file as part of the original partition.
Also located the disk location through the properties section in my computer.
Came up as Location 0.
I-m able to pull files directly off the laptop folder onto the SDHC Card now.
Lovely Jumbly
reply
Samurai
For me the problem is the microsd card itself is locked in that mode. The switch does not work and neither does just using the microsd card itself without the adapter. I have ordered a new card, but still would be nice to see if I can salvage this one for my second 3ds
reply
For me the problem is the microsd card itself is locked in that mode. The switch does not work and neither does just using the microsd card itself without the adapter. I have ordered a new card, but still would be nice to see if I can salvage this one for my second 3ds
reply
Abhijith
DISKPART> clean-
DiskPart has encountered an error: Data error (cyclic redundancy check).-
See the System Event Log for more information.-
this the error which i am facing. i just use a usb card reader for this. please help....
reply
DISKPART> clean-
DiskPart has encountered an error: Data error (cyclic redundancy check).-
See the System Event Log for more information.-
this the error which i am facing. i just use a usb card reader for this. please help....
reply
Nitish
Clean command gives error when write protected and -attributes disk clear readonly- gives no error but when I check for -attributes disk- there is no change in read-only, it is still on -yes-. Hence can't Clean or format.
Please help
reply
Clean command gives error when write protected and -attributes disk clear readonly- gives no error but when I check for -attributes disk- there is no change in read-only, it is still on -yes-. Hence can't Clean or format.
Please help
reply
SK
DISKPART> clean-
DiskPart has encountered an error: Data error (cyclic redundancy check).-
See the System Event Log for more information.
this the error which i am facing. i just use a usb card reader for this. please help....
reply
DISKPART> clean-
DiskPart has encountered an error: Data error (cyclic redundancy check).-
See the System Event Log for more information.
this the error which i am facing. i just use a usb card reader for this. please help....
reply
Add a review, comment
Other channel videos
