Crazy Cluster Toyota Camry - Part II
video description
Date: 2024-11-30
Related videos
Comments and reviews: 20
UberAlphaSirus
Never buy a renault. We got it for a song because Electroinc E brake last year. Remade 40 joints under the seat. Last week weird cutting out issue, more bad electrics. Somebody been at the fuel pump and I got me a new fuel pump pliers tool they left behind. Just sitting there. they done the old rip tie hold her in job. I cut the fecker socket open and off and soldered that fecker. Golden now. I was amazed how long it would run with just fuel residue pressure with the pump off. almost a minute, and no codes whatsoever.
reply
Never buy a renault. We got it for a song because Electroinc E brake last year. Remade 40 joints under the seat. Last week weird cutting out issue, more bad electrics. Somebody been at the fuel pump and I got me a new fuel pump pliers tool they left behind. Just sitting there. they done the old rip tie hold her in job. I cut the fecker socket open and off and soldered that fecker. Golden now. I was amazed how long it would run with just fuel residue pressure with the pump off. almost a minute, and no codes whatsoever.
reply
NaterTaterOutdoors
I did one of these on my 2001 S10 back in the day. I was fighting that light for a good five years and come to find out now I just took my ABS module off and sent it to a repair service off of eBay and I got it back four days later. Just bolted it back on and no more ABS light. If I would’ve known it, been that easy back then I would have sent it off earlier. It’s just some cracked solders that need a quick touch up where the power comes in the box.
reply
I did one of these on my 2001 S10 back in the day. I was fighting that light for a good five years and come to find out now I just took my ABS module off and sent it to a repair service off of eBay and I got it back four days later. Just bolted it back on and no more ABS light. If I would’ve known it, been that easy back then I would have sent it off earlier. It’s just some cracked solders that need a quick touch up where the power comes in the box.
reply
timowallin8020
Yeah haven't yet seen unit(in EU) that you cant buy controller wo hydraulig part, but maybe Toyota has one.
But yes bleeders are great and what is even greater is that its getting more common for ABS module to leave break fluid pressure on some second longer on some lines then other.
Witch makes leaving the lights fun! Example if front left and right rear are on and you accelerate q what happends; )
reply
Yeah haven't yet seen unit(in EU) that you cant buy controller wo hydraulig part, but maybe Toyota has one.
But yes bleeders are great and what is even greater is that its getting more common for ABS module to leave break fluid pressure on some second longer on some lines then other.
Witch makes leaving the lights fun! Example if front left and right rear are on and you accelerate q what happends; )
reply
TheWhale45
Had problems with these back in the 90s on wrecked cars. Toyota tried to blow it off. But there was no exterior damage to them. Ins Co told them they were going to request a ruling from NHTSA for a recall. Suddenly Toyota started warranting them. lol Had the same problem with Hyundai on their mufflers and cat converters. Hyundai started paying for them too. It's always something.
reply
Had problems with these back in the 90s on wrecked cars. Toyota tried to blow it off. But there was no exterior damage to them. Ins Co told them they were going to request a ruling from NHTSA for a recall. Suddenly Toyota started warranting them. lol Had the same problem with Hyundai on their mufflers and cat converters. Hyundai started paying for them too. It's always something.
reply
gregoryhohman3511
I always enjoy the trip to Wilbert's Pick and Pull. I look forward to your videos, assume Wilbert's didn't have the ABS for the Toyota. Eric, I think you should branch out to MotorTrend like Derek from Vice Grip Garage did, I'm sure the MotorTrend audience would enjoy periodic drop in from Mrs O, and the Garage Kitty.
reply
I always enjoy the trip to Wilbert's Pick and Pull. I look forward to your videos, assume Wilbert's didn't have the ABS for the Toyota. Eric, I think you should branch out to MotorTrend like Derek from Vice Grip Garage did, I'm sure the MotorTrend audience would enjoy periodic drop in from Mrs O, and the Garage Kitty.
reply
davidstreling3690
would have been nice to see if you could have opened the electronic side of the module to see if the surface mount parts had been soldered properly it has been mentioned that is usually the reason for the abs failing and yes i have seen that a lot of surface mount parts not being soldered due to unknown reasons
reply
would have been nice to see if you could have opened the electronic side of the module to see if the surface mount parts had been soldered properly it has been mentioned that is usually the reason for the abs failing and yes i have seen that a lot of surface mount parts not being soldered due to unknown reasons
reply
johnandersen6364
Retired now but, thanks to Eric I find myself saying, that's interesting and the all time favorite, that's your problem lady! mostly to my wife while working on her car from time to time. Not to mention Eric's torch skills and a well placed hammer brings me back to the days working in the shop.
reply
Retired now but, thanks to Eric I find myself saying, that's interesting and the all time favorite, that's your problem lady! mostly to my wife while working on her car from time to time. Not to mention Eric's torch skills and a well placed hammer brings me back to the days working in the shop.
reply
davidclemdis4796
How do you do it; how, do, you, do, it, do you have a magic wand
How is it when you make your videos and you need a part from the junkyard It’s always there. I know, it’s a magic junkyard, Right Or do you just pray to the parts Heaven before you go I wish I had a junkyard like that.
reply
How do you do it; how, do, you, do, it, do you have a magic wand
How is it when you make your videos and you need a part from the junkyard It’s always there. I know, it’s a magic junkyard, Right Or do you just pray to the parts Heaven before you go I wish I had a junkyard like that.
reply
codo7
Dont feel like it is a boring vid as you said in numero uno 'crazy cluster'. You wouldn't have known to at least go to the ABS without the scanner. but yes, do a visual inspection first. After watching a hundred or more of your vids I know it's sage advice. due to wisdom.
reply
Dont feel like it is a boring vid as you said in numero uno 'crazy cluster'. You wouldn't have known to at least go to the ABS without the scanner. but yes, do a visual inspection first. After watching a hundred or more of your vids I know it's sage advice. due to wisdom.
reply
turdsandwicher
Random question. I took the rotor off my Tundra to do a wheel bearing when I put it back on it feels like its warped now when stopping. You had a tip to clean them to stop that from happening. Where are you supposed to clean the rust off the back of the rotor
reply
Random question. I took the rotor off my Tundra to do a wheel bearing when I put it back on it feels like its warped now when stopping. You had a tip to clean them to stop that from happening. Where are you supposed to clean the rust off the back of the rotor
reply
pmkstudios
That has got to be the shortest sma video ever. Roomies G Caravan had no heat. No parts required repair unless you count topping up the fluid and cycling the control panel hot to cold and back again. In some cases I really can do it too!
reply
That has got to be the shortest sma video ever. Roomies G Caravan had no heat. No parts required repair unless you count topping up the fluid and cycling the control panel hot to cold and back again. In some cases I really can do it too!
reply
donniev8181
Bet you were happy not to have to change out the entire unit! It's weird that this issue did not affect starting the car. Another great video! I hope you and the family have a Happy Thanksgiving, don't get too full lol.
reply
Bet you were happy not to have to change out the entire unit! It's weird that this issue did not affect starting the car. Another great video! I hope you and the family have a Happy Thanksgiving, don't get too full lol.
reply
Micko350
Eric they're a very common failure over here in Australia, especially in the 50 Series Camrys! I can usually buy a Whole damaged Camry from the Raffles over here for what the Wreckers want just for a second hand ABS unit!
reply
Eric they're a very common failure over here in Australia, especially in the 50 Series Camrys! I can usually buy a Whole damaged Camry from the Raffles over here for what the Wreckers want just for a second hand ABS unit!
reply
bobby9195
Did some learning about can- bus crap, don't know about the year or make, but found out that the last resistor in the can-bus wires is in the ABS module. Learn something every day and I don't even work on cars much
reply
Did some learning about can- bus crap, don't know about the year or make, but found out that the last resistor in the can-bus wires is in the ABS module. Learn something every day and I don't even work on cars much
reply
autorepair
What happened to the bolt you made the pen out of I made some arrow pens. They disappeared. I've been thinking about making a couple more. Brings back memories of Archery Clubs and Tournament Shooting. Cool Vid.
reply
What happened to the bolt you made the pen out of I made some arrow pens. They disappeared. I've been thinking about making a couple more. Brings back memories of Archery Clubs and Tournament Shooting. Cool Vid.
reply
elmerchrisman7683
I used have to change those when I worked G. M. but not many. I was a electrical troubleshooter. I have been retired now since 2010. I enjoy watching your videos you are a hello of a mechanic.
reply
I used have to change those when I worked G. M. but not many. I was a electrical troubleshooter. I have been retired now since 2010. I enjoy watching your videos you are a hello of a mechanic.
reply
Echo024
I got my start in automotive by watching SMA several years ago. Just the other week I diagnosed and repaired one of these with this exact same issue - really cool to see this repair come full circle!
reply
I got my start in automotive by watching SMA several years ago. Just the other week I diagnosed and repaired one of these with this exact same issue - really cool to see this repair come full circle!
reply
harveypaxton1232
On a lot of Ford F series (early 2000s, I have just gone through the PC board and touched up the solder joints. Most of the time it is where the coil connects to the PC board.
reply
On a lot of Ford F series (early 2000s, I have just gone through the PC board and touched up the solder joints. Most of the time it is where the coil connects to the PC board.
reply
haroldkidwell6703
Wow just scrolling seen this one n checked it out my daughter bought an 07 Camry and it's having the same issue thanks Eric O. Now all I have to do is try n find one
reply
Wow just scrolling seen this one n checked it out my daughter bought an 07 Camry and it's having the same issue thanks Eric O. Now all I have to do is try n find one
reply
CurtisLee-z8u
I had to send mine out on my 2013 dodge ram I had to send it to Idaho and have it rebuilt come back in five-year warranty and it works perfect. 400 bucks with shipping.
reply
I had to send mine out on my 2013 dodge ram I had to send it to Idaho and have it rebuilt come back in five-year warranty and it works perfect. 400 bucks with shipping.
reply
Add a review, comment
Other channel videos
